RG 50 - 55 ton, 6' bed length
RG 80 - 88 ton, 6' bed length
RG 100 - 110 ton, 8' bed length

RG 50 - 55 ton, 6' bed length

The RG 50 is designed for fast, versatile and safe material processing. It is an up-acting hydraulic press brake with 55 tons of capacity and a bed length of 6.5 feet. There are 59" between the frames, with an open height of 14.5". The maximum travel distance of the ram is 4", and the maximum bend length that can be formed is 82". The ram repeatability is ±0.0004", while the backgauge can travel 19.6".

The RG 50 has a NC9-EXII control, which is used to control the backgauge, as well as other appropriate functions. There are two methods of entering data into the NC9-EXII control, ANGLE Mode and DEPTH Mode. Also, the RG 50 features rugged machine construction, roller bearing guide block system, beam parallelism and positioning, sectionalized punch holders, a handwheel device, and a foot treadle.

Top of Page

RG 80 - 88 ton, 6' bed length

The RG 80 is designed for fast, versatile and safe material processing. It is an up-acting hydraulic press brake with 88 tons of capacity and a bed length of 8 feet. There are 80" between the frames, with an open height of 14.5". The maximum travel distance of the ram is 4", and the maximum bend length that can be formed is 98". The ram repeatability is ±0.0004", while the backgauge can travel 19.6".

The RG 80 has a NC9-EXII control, which is used to control the backgauge, as well as other appropriate functions. There are two methods of entering data into the NC9-EXII control, ANGLE Mode and DEPTH Mode. Also, the RG 80 features rugged machine construction, roller bearing guide block system, beam parallelism and positioning, sectionalized punch holders, a handwheel device, and a foot treadle.

Top of Page

RG 100 - 110 ton, 8' bed length

The RG 100 is designed for fast, versatile and safe material processing. It is an up-acting hydraulic press brake with 110 tons of capacity and a bed length of 10 feet. There are 100" between the frames, with an open height of 14.5". The maximum travel distance of the ram is 4", and the maximum bend length that can be formed is 122". The ram repeatability is ±0.0004", while the backgauge can travel 19.6".

The RG 100 has a NC9-EXII control, which is used to control the backgauge, as well as other appropriate functions. There are two methods of entering data into the NC9-EXII control, ANGLE Mode and DEPTH Mode. Also, the RG 100 features rugged machine construction, roller bearing guide block system, beam parallelism and positioning, sectionalized punch holders, a handwheel device, and a foot treadle.

Top of Page